Flashing your VU+ Duo With A USB Stick

It is very simple to flash your VU+ Duo receiver using an USB stick.
Just follow these instructions:

1. Format your USB stick with a FAT32 file system
2. Create a folder “vuplus” in the root directory of the USB disk (note: this HAS to be lower case!)
3. Create a folder “duo” in the “vuplus” directory you’ve just created (again, this HAS to be lower case!)
4. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool
5. Copy the three files that are in the zip archive to the “duo” directory on the USB stick
6. Switch your VU+ Duo off (power-off, not stand-by!)
7. Insert the prepared USB stick into the front of your VU+ Duo receiver
8. Switch your VU+ Duo on
9. Follow the installation instructions on the screen