How install an image on a USB stick with Meoboot by bogdanm

How install an image on a USB stick with Meoboot.

Please remember to run Meoboot you must have the Black Hole image in the flash memory of your box.

As follows :-

1} Press Green button @STB Remote Control and select from the plugins Meoboot, the plugins page will look like this {1}

2} Now Press OK button after this you see panel on this screen you must select on what device you
want to install Meoboot {2;3}

2.1} Best way is to install Meoboot on a USB stick

3} When you have selected where to install Meoboot, just press the Red button and the info page will ask if you want to install meboot onto your usb stick {4}
Press OK button and Meoboot will be installed.

4} Now you need to copy an image from your PC to your box (using your favourite ftp program). They go into the directory /media/meoboot/MbootUpload.
Image must be in zip format because Meoboot ignores all others. {6}

5} Now go back to your box and in the Meoboot plugin you will see the how much free space you have to install new images {5} . The size of your usb stick will determine how many images you can install, with my stick I have 2gb free space, which is now my flash size.

6} If you have any problems or you are not sure where to place the image(s) just press the blue button for help, a brief description of this guide has been built into the image by the coder {8}

7} Press Red button and Meoboot will ask you to give your new image a **** and also ask if you want to copy your current settings from your main flash image to your new Meoboot image. {9}
- You can give the new image any **** you want; please see example
- You do not have to copy your current settings, all images can be setup independantly if you wish ; please see example

8} Ok when you are ready, press the Red button and Meoboot will start to install the new image onto your usb stick {10}
When installation is complete your box will automaticly reboot and the new image will be selected to boot from.

9} You will see a menu like in the picture, showing you what images are installed and giving you the option of which to boot from {11}

10} If you push Green button and select VTI to boot from, your box will reboot and your newly installed image will run {12}

11} You will be asked to confirm you want to reboot and use the new image, just select yes and your box will reboot {13}