No announcement yet.

How to - Compile Oscam on Ubuntu

  • Filter
  • Time
  • Show
Clear All
new posts

  • How to - Compile Oscam on Ubuntu

    How to - Compile Oscam on Ubuntu

    You need to connect to your PC using telnet (putty). Select all three lines at the same time and copy paste them in putty (telnet). OS will start to install packages.

    apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g++ flex bison pkg-config wget libpng3 pkg-config wget libpng3 libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libpng12-0 libpng12-dev libpng3 zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial hal

    Install this package only if you have Smargo cardreader:

    tar xjf libusb-1.0.8.tar.bz2
    cd libusb-1.0.8
    ./configure; make; make install

    Now we are ready for final steps!

    cd .. (you need to come to the root of your sistem)
    svn co oscam-svn # you can also add -r ***x at the end, if you want to download specific version of oscam. Lets say 7190. Very useful, especially if newer versions of OScam are very unstable!
    cd oscam
    mkdir build
    cd build
    cmake ..
    make install (this command will install oscam to /usr/local/bin folder!!)

    Now you need to chmod oscam file to 0755. Use these commands:

    cd /usr/local/bin

    chmod 755 oscam

    You also need to setup automatic startup with boot. Execute these commands:

    nano /etc/rc.local

    Before “exit 0″ line write this line:

    /usr/local/bin/oscam -b

    Press CTRL+C and confirm changes with Y.

    This is it! Now you need to create oscam config files and transfer them to /usr/local/etc. You will also be able to use PSCS (Omnikey for example) and Smargo cardreaders!

  • #2
    thank you mister KOF for this information

    o Not Send Me PM For Support
    2 Do Not Send Me PM For ASK Test.
    3 Ask Your Question On The Forum.

    My Email is :