Announcement

Collapse
No announcement yet.

How to update the Edision Argus Mini 2IN1 HD Receiver using a USB drive

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to update the Edision Argus Mini 2IN1 HD Receiver using a USB drive

    How to update the Edision Argus Mini 2IN1 HD Receiver using a USB drive

    He Fenst Update from USB / HDD
    Warning:
    The software update will start immediately after pressing the OK button, and must not be interrupted
    are.
    You exit the menu 'update from USB / HDD' by pressing the EXIT button.
    Update from USB / HDD
    Understanding:
    In this menu you can go if a suitable USB data storage
    was connected and recognized by the receiver. Otherwise, this menu is not available.
    Another prerequisite for a 'update from USB / HDD' that on the USB data storage, the
    appropriate software file is located. This file with the file extension 'abs.' You can use a
    Download PC with an Internet connection from the 'argus mini plus high speed' website:
    http://www.argus-family.de
    Save the downloaded file from your PC to the USB memory stick and plug
    These data memory into the USB port of the 'argus mini plus high speed'.
    Note:
    The speed of the updates via USB may depend on the organization of
    From data on the USB memory. It is recommended that the USB memory to the first point
    'Format HDD' in the 'USB' / 'information storage' to prepare (to format, starting with the
    yellow button) and then the software file (. abs) to save it.


    1.jpg

    He Fenst Updat e from USB / HDD
    Warning:
    The software update will start immediately after pressing the OK button, and must not be interrupted
    are.
    You exit the menu 'update from USB / HDD' by pressing the EXIT button.
    Update from USB / HDD
    Understanding:
    In this menu you can go if a suitable USB data storage
    was connected and recognized by the receiver. Otherwise, this menu is not available.
    Another prerequisite for a 'update from USB / HDD' that on the USB data storage, the
    appropriate software file is located. This file with the file extension 'abs.' You can use a
    Download PC with an Internet connection from the 'argus mini plus high speed' website:
    http://www.argus-family.de
    Save the downloaded file from your PC to the USB memory stick and plug
    These data memory into the USB port of the 'argus mini plus high speed'.
    Note:
    The speed of the updates via USB may depend on the organization of
    From data on the USB memory. It is recommended that the USB memory to the first point
    'Format HDD' in the 'USB' / 'information storage' to prepare (to format, starting with the
    yellow button) and then the software file (. abs) to save it.
    Functions and settings in the menu:
    Open file:
    If the receiver found on the USB memory device to update files, shows
    He at this. You can use the arrow keys or by pressing the OK button, the file
    Set update. If no file is found, this is indicated by 'No File'
    displayed.
    Update Mode:
    Start:
    If you set the software file and the update mode, scroll
    Use the arrow keys up / down to the point 'Start'. Press the OK button and
    the update process begins.

    2.jpg
    Attached Files
Working...
X