Announcement

Collapse
No announcement yet.

How to update the MicroBox dongle

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [UPDATE] How to update the MicroBox dongle

    How to update the MicroBox dongle

    Step 1:

    Connect the MicroBox dongle to the power, after that connect the serial port from the MicroBox to the serial port, in your PC.
    Step 2:

    - Download the cleaner software for the downloads section, then open the cleaner.exe file.
    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/5462388.png?530[/IMG]

    Step 3:

    - After you have the program opened click START button, then you should see that a
    "Waiting Boot..." is showing up near the software title.

    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/8961502.png?528[/IMG]

    Step 4:

    - Now unplug the power cable from the dongle for 3 seconds then plug it again, into the Dongle, after that you should be able to see the progress bar increasing and the cleaning process is started.
    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/9307182.png?527[/IMG]

    Step 5:

    - Once the cleaning process reaches 100%, you are good so far, unplug it again from the power for 3 seconds then plug it again.
    Step 6:

    - Now download the software that you want to install from the site, then open the file.
    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/3091382.png?516[/IMG]

    Step 7:

    - Open the .exe file, which is the software it self.
    Step 8:

    - After you have the program opened click START button, then you should see that a
    "Waiting Boot..." is showing up near the software title.

    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/8047277.png?525[/IMG]

    Step 9:

    - Now unplug the power cable from the dongle for 3 seconds then plug it again, into the Dongle, after that you should be able to see the progress bar increasing and the transferring process is started.
    [IMG]http://all-dongle.***********/uploads/4/8/4/9/4849076/8175840.png?529[/IMG]

    Step 10:

    - Once the transfering process reaches 100%, you are good so far, unplug it again from the power for 3 seconds then plug it again, and by this you have the software installed at your MicroBox Dongle.
Working...
X