Announcement

Collapse
No announcement yet.

Code menu activations

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [GUIDE] Code menu activations

    Started this thread as it seems to be a fairly common question.

    If you know the reset procedure for a receiver,

    please post it here.

    This thread is for working resets only

    No questions please84517415.jpg


    Regards

    You should Read Rules


  • #2
    Press Menu button
    and then type in 6787
    this will take the receiver back to factory settings.

    Comment


    • #3
      Echostar 3000.

      Using the remote press:

      Menu 6, 6, 6, red.

      Comment


      • #4
        SilverCrest SL65

        Go to system setup in the menu and select factory settings. This will wipe your box and start from the beggining.

        Comment


        • #5
          Remamber


          On a SilverCrest SL65/12 just hold in the power button for 8 - 10 seconds this will reset the unit loosing all user data and settings this also gets round forgotten pin protection.

          Comment


          • #6
            Topfield / 2606 this number will reset the old password

            Comment


            • #7
              Example:

              BISS KEY METHOD IN NEOSAT 9800I-S
              Main Ver 1.71 G4C5M2S3[R1619]
              Boot Ver 1.34
              Data Ver 24
              Last Update 23/03/2020

              AOA
              You can put these keys in your machines (Neosat) but the method is quite simple & different .
              Note - (NEOSAT SX9800I-S supports BISS system 100% tested ok.)

              First u select ur channel then

              1 - Press MENU ( Remote control )

              2- Press RED button ( Remote control )

              3 - You will notice a small WINDOW BOX to edit keys ( TV screen )

              4 - Put these key 9C 18 B1 65 81 B8 2A 63 then press DONE.

              5- Press again RED button & put these key 44 DB B0 CF 7F 94 92 A5 then press DONE.

              Final u exit the menu & enjoy ur channel

              ------------------------------------Works 100%-----------------------------------

              Conax Nagra Seca Viaccess Irdeto Cryptoworks Method
              Only PRESS ''0'' from Remote Control
              Appear WINDOW BOX on ur TV screen to edit keys.
              ------------------------------------------

              1
              D
              o Not Send Me PM For Support
              .
              2 Do Not Send Me PM For ASK Test.
              3 Ask Your Question On The Forum.

              ------------------------------------------
              My Email is :
              mspauljayo[at]gmail.com
              ------------------------------------------


              Comment


              • #8
                Supermax All PLUS ST SUPER models

                Their code activation is :-

                1. Press Manu
                2. STB Information
                3. Press Red botton from RCU
                4. And insert 5790


                Supermax 9100 FTA

                Press Manu and 7799
                ------------------------------------------

                1
                D
                o Not Send Me PM For Support
                .
                2 Do Not Send Me PM For ASK Test.
                3 Ask Your Question On The Forum.

                ------------------------------------------
                My Email is :
                mspauljayo[at]gmail.com
                ------------------------------------------


                Comment


                • #9
                  MediaStar Hi-Tec and Super
                  For activation
                  1. Press Menu
                  2. Then Press following quickly 2580
                  3. then press "back" button to exit from main menu

                  now to view code menu

                  1. now press "0" to view code menu


                  Strong 3680

                  Press Menu
                  Goto Innformation system (note donot press ok just hilight it)
                  enter any of these number 9696 or 8282 or 7799
                  Code menu will appear



                  Star Port 9550

                  1. Menu
                  2. STB Status
                  3. Enter 9999

                  Code menu will appear


                  Samsat

                  1. Menu
                  2. Installtion then ok
                  3. Enter 0937

                  select Code from Dialog box and press OK

                  Code menu will open


                  Echo Star

                  1. Menu
                  2. Select System Setting
                  3. Select Language Setting
                  4. Press Red button on remote
                  5. enter 2528
                  6. Press Red Button two time
                  7.then press OK button

                  Code menu will appear




                  Star SAT 650,3100 and 3500

                  goto any encrypted channel
                  press "pause" button from RCU
                  Select require encryption System and press OK
                  Key Edit Menu will appear for selected Encryption system

                  Dawoo DSD 9270
                  1. Menu
                  2. Game
                  3. EDIT KEY
                  4. Enter pin number
                  5. Select Encryption System and press OK
                  6. EDIT required code and press EXIT

                  DIscovery

                  1. GOTO any SCreambled Channel
                  2. press BLUE button 3 Times
                  3. CODE menu will appear slection key system and press OK
                  4. Press RED button EDIT CODE menu appear
                  5. EDIT the code and press the RED button CODE EDIT menu disappear
                  6. press EXIT to save the CODEs


                  G BOX

                  1. MENU
                  2. GAME
                  3. enter 2356
                  4. Select "EDIT KEY"
                  5. CODE MENU will appear

                  Truman Diamond

                  FIrst time to activate after upgrade
                  1. MENU
                  2. PARENTAL CONTROL
                  3. ENTER 2958 and PRESS OK
                  4. Return to MAIN MENU

                  and to EDIT CODE do the following
                  1. MENU
                  2. ISTALLATION
                  3. INPUT CODE
                  4. CODE MENU will appear


                  Superlazer 16000 Starbox 7400 Tracksat


                  1. Press Manu
                  2. and 99999

                  TechView

                  Press RED button 4 Times to Activate Code Menu
                  ------------------------------------------

                  1
                  D
                  o Not Send Me PM For Support
                  .
                  2 Do Not Send Me PM For ASK Test.
                  3 Ask Your Question On The Forum.

                  ------------------------------------------
                  My Email is :
                  mspauljayo[at]gmail.com
                  ------------------------------------------


                  Comment


                  • #10
                    MediaCom MFT930i


                    1. Menu
                    2. Enter 1234 (code menu will appear)
                    3. RED (viaccess) , GREEN (SECA), YELLOW (IRDETO), BLUE (NEGRA)
                    MENU ( CONEX)

                    OR

                    1. Menu
                    2. Enter 9300 and select CODE EDIT


                    X-Cruiser S2_CX3X_Ver_774S2

                    FIrst time to activate after upgrade

                    1. MENU

                    2. PARENTAL CONTROL

                    3. ENTER 3333 and

                    4. PRESS RED button to Activate Code Menu


                    All Mondeal models -

                    1. Go to Menu.

                    2. Go to system setting.

                    3. Press 4 1 3 5 on your remote.

                    4. A new optio comes at the bottom, Key Editor, press Red button to enter.




                    ASTROVOX AND MIRCO-X MASTER CODES AND CODE ACTIVATION

                    MDR-4000 FTA
                    Master Password>>>>>>1250
                    Code Activation >>>>>>>>>>Automatically after loading the S/W.

                    VSR-2500 FTA
                    Master Password>>>>>>1250
                    Code Activation >>>>>>>>>>Automatically after loading the S/W.

                    VSR-2600 FTA PLUS
                    Master Password>>>>>>1004
                    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "9999" – Go and enable Emulation – Red Button to save.

                    MDR-2800 FTA
                    Master Password>>>>>>1004
                    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

                    MDR-6000 IR
                    Master Password>>>>>>1004
                    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

                    MDR-6500 IRCI
                    Master Password>>>>>>1004
                    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

                    VSR-250 FTA
                    Master Password>>>>>>RELOAD S/W
                    Code Activation >>>>Blue button followed by "0000"on any channel.

                    MDR-4500 FTA
                    Master Password>>>>>>8175
                    Code Activation >>>>Menu – Parental Control – Enter 3453 then press Menu to exit.

                    VSR-2600 FTA
                    Master Password>>>>>>1668
                    Code Activation >>>>Menu – Parental Control – Second Pin Enter 1668 – Switch On.

                    VSR-3000 CI
                    Master Password>>>>>>1250
                    Code Activation >>>>Automatically after loading the S/W..

                    VSR-4550 MR
                    Master Password>>>>>>1668
                    Code Activation >>>>Automatically after loading the Matrix S/W.

                    VSR-4500 2CI
                    Master Password>>>>>>1668
                    Code Activation >>>>Automatically after loading the Penta S/W.

                    VSR-4600 2CI
                    Master Password>>>>>>1668
                    Code Activation >>>>Automatically after loading the Matrix S/W.

                    VSR-7000 CX
                    Master Password>>>>>>1668
                    Code Activation >>>>Automatically after loading the S/W..
                    ------------------------------------------

                    1
                    D
                    o Not Send Me PM For Support
                    .
                    2 Do Not Send Me PM For ASK Test.
                    3 Ask Your Question On The Forum.

                    ------------------------------------------
                    My Email is :
                    mspauljayo[at]gmail.com
                    ------------------------------------------


                    Comment


                    • #11
                      CODE MENU ACTIVATION OF EL-909 S/W Version 1.0.1

                      1. press menu button
                      2. Then Press game option
                      3. And insert 2020
                      Code menu will appear
                      ----------------------------------------
                      1-------> MENU

                      2-------> GAME

                      3-------> 2020

                      NOW ACTIVE CODE MENU

                      Code Edet


                      Neosat 1600 (aaa)
                      Press "9339" on any TV channel screen & ur code menue wille be open

                      technosat T- 888 Digital satellite receiver

                      1-reboot your stb
                      2-press exit then 6108(fastly)
                      your stb will reboot after that code
                      3-go to menu prantel lock there is a new step will be apper (chennel lock)
                      change it to temmpory.
                      4-press blue key to save.
                      5-reboot your stb again and press exit 8088.
                      ------------------------------------------

                      1
                      D
                      o Not Send Me PM For Support
                      .
                      2 Do Not Send Me PM For ASK Test.
                      3 Ask Your Question On The Forum.

                      ------------------------------------------
                      My Email is :
                      mspauljayo[at]gmail.com
                      ------------------------------------------


                      Comment


                      • #12
                        Aztech 1004,1111
                        Aztech 1004,1111
                        Astrovox 1668,1010, 8175, 1250
                        Astra3472 6789,9876
                        Astrovox 8175,1250,1668,1010
                        Benjamin 1004,1250
                        Benjamin 1004,1250
                        Baftec8008
                        Dragon 1668
                        Baff 2142
                        Baff 2142
                        Bluejay 3742
                        Botech2000-2001ci 4200
                        Botek 5183
                        Besat 8175
                        Digitel 0867,0786
                        Dynavision CI-888, CI-991 1004
                        Digital Telecom 2000 1004,0786
                        Digital Telecom X10 1250 (Activate Code 7799)
                        Digital Telecom DB9 1818
                        (Activate Code 8040)
                        Digital Telecom x100 2046 (Activate Code 9339)
                        Dizipia 2142
                        Digimaster4100FTA 2606
                        Digimaster4300CI 2606
                        Digimaster4400CIP 2606
                        Digital Telecom 2003/04 2999-1976
                        Digital Telecom X11 3328
                        Dynavision CX 777 5518
                        Digi Box 8175 DV 8503 DWay 8503
                        Daewoo 8503,0500,0600
                        Digital Telecom Black Box & +1, +2 8989 (Activate Code 9999)
                        Dynavision Elite CX-9900 9247
                        Dynavision Elite F-6600 9247
                        Digital Telecom X400 9876
                        Digital Telecom X1500D & X1001 MINI 9876 (Activate Code PAGE UP)
                        Echolink EL-707 FTA, Plus 2020-1520
                        Euromax Em5000/7000CI 2142
                        Echolink EL-700 FTA 3327
                        EchoStar 2110, 3000, 3600 3453
                        Echo Set 7176 EchoStar 2200-1200 7604
                        EchoStar 7604,2441,3604
                        EuroStar/ Euro Box 9999-0000
                        Echolink EL-888 FTA Super 3327
                        FortecStar Oneworld 0914
                        FortecStar6000 1002
                        FortecStar 1002, 1004,2228,2002,2004
                        FortecStar Lifetime Ultra 1010,1012,9966,6699,0000
                        FortecStar 5100PLUS 1010,1668,1002,1111
                        FortecStar Alpha/Beta 2580 FortecStar 500 7777
                        GoldmasterSAT 3453,2606,3141,9247,1600,1700
                        Gold Sat DSR 9400 9400, 2606
                        Galaxy 9949
                        Humax 0000-1234
                        Hyundai 0325,6962,8503,0500,0600
                        Hyundai1100MCOM 1004
                        ****box1-2-3 1004
                        Micro-X MDR-2800 FTA 1004
                        Micro-X MDR-6000 IR 1004
                        Micro-X MDR-6500 IRCI 1004
                        Mediacom MFT 910I 1250
                        Mediacom EXEL 1250
                        Micro-X MDR-4000 FTA 1250
                        Mediacom MFT 910 Plus 168138
                        MediaStar 2142,8175
                        Megastar 2606,3141
                        Mediacom MFT 930I 5347
                        Mediacom MCI Elite 7777
                        Neosat SX-1600 Plus 1004
                        Nokia 9800-9860-9600 1234
                        Nokia 9200 147258
                        Neosat 9800CI 1631,6805
                        Natvision 1668,1010
                        Neosat 9800I 2142
                        Neosat SX-9800CI 2580,3842
                        Nokia 9600 S 5790
                        NextWawe 8503
                        Neosat New 9600 8510
                        Neosat 9800CI (old) 8510
                        Oliverstar PressTheMenuKeyAndENTER9999,PressOK.
                        OnwaX2FTA 3141
                        OnwaX3FTA 2606
                        OnwaX4 3141
                        OnwaX5CI 2606
                        OnwaX7CIM 2606
                        OnwaX9PVR 2606
                        OnwaX2FTA 3141
                        OnwaX6CI 3141
                        OnwaX13CIM 3141
                        OnwaX23CIM 3141
                        Opensky 0786,1777
                        OpenStar 1234
                        Opentel 0937,3472
                        ace 9949
                        Panasonic 3872,3472,1470,3725,2374
                        Pansat 1668,1010
                        Pengamin 1250
                        **********************************

                        Radix 9815

                        **********************************
                        Samsat 0937
                        Samson SSI 9876
                        Samsung 0235,7777
                        Samsung702 9911
                        Samsung202SVACI 1631
                        SamsungModelDSR2000 Press Menu Key, Go To System Setup And Go To System Information, Enter 0000.
                        SanyoSat5400-5700-7000 3472,2374,3724,1250,6893
                        Satcruiser 3742,3472
                        Signal 8888,5555,4444
                        Smart 3472,6934
                        Starsat 1234,1361,2999,1999,9876
                        Startrack 0786,2480, 1004 3327
                        Strong 0235,0325,1361,0735
                        SuperLazer20000/1000 2142
                        SuperMax 5790
                        **********************************

                        Taplin 3453
                        TechnoSat 3724,2374,7176,2606,1470,2441,3724,1250, 6893, 8766,1497
                        Teleman 7176,1973
                        Topfield 2606,2999
                        Toshiba 1048
                        Truman TM-150, 100Plus, 160, 155, 7000, Vege 1004
                        Truman TM-7000 Plus/Xtream 8191
                        Truman TM-100, 200 8175-2958

                        **********************************
                        Vantage 1404
                        Vestel 8277,929526
                        Vortec 2002,7777
                        **********************************

                        Winnersat 0963
                        Wisplus 5030
                        Wiztech 2020
                        **********************************
                        Xcruiser 100, 200, 300, 400, 500, 750, 725 1250
                        **********************************
                        Zinwell 8888
                        **********************************
                        ASTROVOX AND MIRCO-X MASTER CODES AND CODE ACTIVATION
                        --------------------------------------------------------------------------
                        MDR-4000 FTA

                        Code Activation >>>>>>>>>>Automatically after loading the S/W.
                        --------------------------------------------------------------------------

                        VSR-2500 FTA

                        Code Activation >>>>>>>>>>Automatically after loading the S/W.

                        --------------------------------------------------------------------------
                        VSR-2600 FTA PLUS

                        Code Activation >>>>Menu – Language Setting – Ok –
                        Red Button followed by "9999" – Go and enable Emulation – Red Button to save.
                        --------------------------------------------------------------------------

                        MDR-2800 FTA

                        Code Activation >>>>Menu – Language Setting – Ok –
                        Red Button followed by "8888" – Go and enable Emulation – Red Button to save.
                        --------------------------------------------------------------------------

                        MDR-6000 IR

                        Code Activation >>>>Menu – Language Setting – Ok –
                        Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

                        -------------------------------------------------------------------------
                        MDR-6500 IRCI

                        Code Activation >>>>Menu – Language Setting – Ok –
                        Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

                        --------------------------------------------------------------------------
                        VSR-250 FTA

                        Code Activation >>>>Blue button followed by "0000"on any channel.

                        --------------------------------------------------------------------------
                        MDR-4500 FTA

                        Code Activation >>>>Menu – Parental Control – Enter 3453 then press Menu to exit.
                        --------------------------------------------------------------------------

                        VSR-2600 FTA

                        Code Activation >>>>Menu – Parental Control – Second Pin Enter 1668 – Switch On.
                        --------------------------------------------------------------------------

                        VSR-3000 CI

                        Code Activation >>>>Automatically after loading the S/W..
                        --------------------------------------------------------------------------
                        VSR-4550 MR

                        Code Activation >>>>Automatically after loading the Matrix S/W.
                        --------------------------------------------------------------------------
                        VSR-4500 2CI

                        Code Activation >>>>Automatically after loading the Penta S/W.

                        --------------------------------------------------------------------------
                        VSR-4600 2CI

                        Code Activation >>>>Automatically after loading the Matrix S/W.
                        --------------------------------------------------------------------------

                        VSR-7000 CX

                        Code Activation >>>>Automatically after loading the S/W..

                        ENJOY
                        TECNOSAT 2000 ULTRA

                        Press MENU then Press 5400
                        ******************************************
                        STARSAT SUPER = STARCOM SUPER SW:
                        Press____menu____installition____last line = input code press OK.
                        ************************************************** *
                        ************************************************** *
                        Starsat ULTRA SW"
                        Press______menu____ press digit 1 2 3 4 & will appeare.
                        ************************************************** *
                        ************************************************** **
                        Sony sat 9000 plus & 9800 plus SW:
                        Press____menu____installation_____last line = input code press OK.
                        ************************************************** *

                        ************************************************** **
                        SonySat 9500 SW:
                        Press______menu____ press digit 1 2 3 4 & will appear.
                        ************************************************** *
                        ************************************************** **
                        TRUMAN SW:
                        to enter code menu & activate decoding:
                        Press____menu____lest line = Parental control press OK____
                        enter digit 2 9 5 8 then press menu the code option will appear and decoding begin
                        ************************************************** *
                        ************************************************** **
                        Bright & Micro-x SW:
                        to enter code menu & activate decoding:
                        Press____menu____lest line = Parental control press OK____
                        enter digit 3 5 4 3 then press menu the code option will appear and decoding begin
                        ************************************************** ***

                        ************************************************** ***
                        SUPER MAX 6000CI PLUS & SUPER

                        PRESS MENU GO TO STB INFORMATION

                        PRES OK AND RED BUTN PRESS AND PASWRD DIAL 5790

                        IF NEXT SOFTWAER USE DIAL PASSWARD 1234
                        ************************************************** ***

                        *************************************************
                        AKIRA

                        SYSTEM SETTING PRES 5038 AND PRASS RED BUTTN
                        ***************************************

                        NEOSAT 1600PLUS & STAR TRACK 550D

                        PRESS AND DIAL 9339 CDOE ACTIVE
                        ****************************************
                        LIFE TIME CLASIC NEW

                        PRESS MENU AND 9090 COD MENU ACTIVE
                        Supermax All PLUS ST SUPER models

                        Their code activation is :-

                        1. Press Manu
                        2. STB Information
                        3. Press Red botton from RCU
                        4. And insert 5790

                        ------------------------------------------------------
                        Supermax 9100 FTA

                        Press Manu and 7799

                        enjoy
                        ------------------------------------------------------
                        Star Port 9550

                        1. Menu
                        2. STB Status
                        3. Enter 9999

                        Code menu will appear

                        ------------------------------------------------------
                        Samsat

                        1. Menu
                        2. Installtion then ok
                        3. Enter 0937

                        select Code from Dialog box and press OK

                        Code menu will open


                        enjoy
                        ------------------------------------------------------
                        technosat T- 888 Digital satellite receiver

                        1-reboot your stb
                        2-press exit then 6108(fastly)
                        your stb will reboot after that code
                        3-go to menu prantel lock there is a new step will be apper (chennel lock)
                        change it to temmpory.
                        4-press blue key to save.
                        5-reboot your stb again and press exit 8088.
                        ------------------------------------------------------
                        Echo Star

                        1. Menu
                        2. Select System Setting
                        3. Select Language Setting
                        4. Press Red button on remote
                        5. enter 2528
                        6. Press Red Button two time
                        7.then press OK button

                        Code menu will appear
                        ------------------------------------------------------
                        Superlazer 16000 Starbox 7400 Tracksat


                        1. Press Manu
                        2. and 99999
                        ------------------------------------------------------
                        ECOSPIEC 2525 CI AND 8585

                        PRES MENU AND GOTO SYSTEM SITING

                        PRESS 6382 CODE MENU ACTIVE
                        ------------------------------------------------------
                        TECNOSAT T-888 FTA

                        1. Press ?EXIT? button & ?6108? through RCU
                        (Remote Control Unit), activate patch.
                        2. Then go to Menu Parental Lock Input Password ?0000?.
                        3. Pay Channel Lock Status has to be ?OFF"
                        for the Scrambled Channels to work.
                        ------------------------------------------------------
                        VIVA 9000CI & VIVA 9000FTA

                        PRESS MUNU AND DAIL 19370

                        SHOW I BOX DIAL 2486

                        CODE MENU ACTIVE AND PRESS GAME OPION CODE SHOW .
                        ------------------------------------------------------
                        Starsat 200 CI
                        Press MENU
                        Go to STB Settings, but do not press OK
                        Press 1234
                        Code menu is active
                        ------------------------------------
                        OpenSky 2000 FTA+CI
                        menu
                        press 19370
                        enter pin 2486
                        that it

                        now go to menu >games>edit keys
                        ----------------------------------------------------
                        ------------------------------------------------------
                        Star SAT 650,3100 and 3500

                        goto any encrypted channel
                        press "pause" button from RCU
                        Select require encryption System and press OK
                        Key Edit Menu will appear for selected Encryption system
                        ------------------------------------------------------
                        Dawoo DSD 9270
                        1. Menu
                        2. Game
                        3. EDIT KEY
                        4. Enter pin number
                        5. Select Encryption System and press OK
                        6. EDIT required code and press EXIT
                        ------------------------------------------------------
                        G BOX

                        1. MENU
                        2. GAME
                        3. enter 2356
                        4. Select "EDIT KEY"
                        5. CODE MENU will appear
                        ------------------------------------------------------

                        Truman Diamond

                        FIrst time to activate after upgrade
                        1. MENU
                        2. PARENTAL CONTROL
                        3. ENTER 2958 and PRESS OK
                        4. Return to MAIN MENU

                        and to EDIT CODE do the following
                        1. MENU
                        2. ISTALLATION
                        3. INPUT CODE
                        4. CODE MENU will appear
                        ------------------------------------------------------
                        Superlazer 16000 Starbox 7400 Tracksat


                        1. Press Manu
                        2. and 99999

                        ------------------------------------------------------
                        TechView

                        Press RED button 4 Times to Activate Code Menu

                        --------------------------------------------------------

                        MediaCom MFT930i


                        1. Menu
                        2. Enter 1234 (code menu will appear)
                        3. RED (viaccess) , GREEN (SECA), YELLOW (IRDETO), BLUE (NEGRA)
                        MENU ( CONEX)

                        OR

                        1. Menu
                        2. Enter 9300 and select CODE EDIT


                        enjoy
                        ------------------------------------------------------
                        MediaStar Hi-Tec and Super
                        For activation
                        1. Press Menu
                        2. Then Press following quickly 2580
                        3. then press "back" button to exit from main menu

                        now to view code menu

                        1. now press "0" to view code menu

                        ------------------------------------------------------
                        Strong 3680

                        Press Menu
                        Goto Innformation system (note donot press ok just hilight it)
                        enter any of these number 9696 or 8282 or 7799
                        Code menu will appear
                        ------------------------------------------

                        1
                        D
                        o Not Send Me PM For Support
                        .
                        2 Do Not Send Me PM For ASK Test.
                        3 Ask Your Question On The Forum.

                        ------------------------------------------
                        My Email is :
                        mspauljayo[at]gmail.com
                        ------------------------------------------


                        Comment


                        • #13
                          APEX3000plus + APEX4000Hplus
                          TECHNOSAT T-9000 + T-9800
                          ALL SMART

                          ****
                          MENU ----) INSTALLATION ----) PARENTAL CONTROL

                          Then press:

                          INFO + GUIDE

                          5400
                          MASTERS is offline Reply With Quote
                          ------------------------------------------

                          1
                          D
                          o Not Send Me PM For Support
                          .
                          2 Do Not Send Me PM For ASK Test.
                          3 Ask Your Question On The Forum.

                          ------------------------------------------
                          My Email is :
                          mspauljayo[at]gmail.com
                          ------------------------------------------


                          Comment

                          Working...
                          X