No announcement yet.

How to install oscam on vps

  • Filter
  • Time
  • Show
Clear All
new posts

  • How to install oscam on vps

    Recently I acquired cheap VPS at
    They offer cheap VPS packages and are suitable for running OScam.
    My other suggestions would be (has lower upload speeds though) and (prices are from 9.99EUR here).
    Installing OScam on VPS is an easy task and here is how you do it.

    EDIT: I also tested and I can say this VPS is even better than
    It offers higher upload speeds for same price and upload is very important, especially if you are using OScam with its cache-ex function!

    First you need to compile OScam. I suggest you compile it using Simplebuild script.
    Please check my Simplebuild article here on my blog. Simplebuild will also automatically install all missing packages that are needed for successful compile.

    After compiling OScam for you VPS, you need to put oscam executable file to /usr/local/bin folder on your VPS server.
    Use 0755 permissions for this file. Then you need to put oscam configuration files to /usr/local/etc folder.
    You need oscam.user, oscam.conf and oscam.server. Just create empty files with these names and upload them to /usr/local/etc folder.
    One setting is very important in oscam.user and that is httpallowed!
    You should set this to: httpallowed = IPOFYOURCOMPUTER (NOT LOCAL NETWORK IP!!)

    Now you need to run oscam with this command: ./oscam -b
    OScam should be running now. You wont be able to connect to WebIf right away.
    For this you need to enter this in oscam.conf file:

    httpport                      = 16002
    httpuser                      = root
    httppwd                       = ***
    httprefresh                   = 10
    httpallowed                   = WAN IP of your computer (use website
    If you want that OScam starts automatically with system boot, then I suggest that you install Webmin which is free software for maintaining Linux servers.
    If you decide to use Debian on VPS (as I did), then follow this tutorial to install Webmin on Debian:
    If you decide to use Ubuntu 12.04, please check tutorial on TheWebPrograms blog where you will get all information about how to install Webmin in Ubuntu 12.04! I WILL EXPLAIN THAT ON !!!

    After installation you will be able to enter webmin with this link: YOURVPSIP:10000

    Before entering this link, you need to alter one setting in file miniserv.conf which is located in
    /etc/webmin/ folder.
    Open that file and change setting
    ssl=1 to ssl=0.
    Save it and enter this command in telnet:
    service webmin restart
    Webmin will restart and remote access to Webmin should be working now. Easy

    For automatic start of OScam, just visit Cronjob section of Webmin and create new cronjob. Use these settings:

    Execute cron job as: root

    Command: /usr/local/bin/oscam -b
    Want to execute : When system boots
    Save it and OScam will now start with system boot. I think I covered all aspects of installing OScam on VPS.
    If you have any additional questions or you think that I missed something, please add a comment!
    Thanks for reading my thread.

    o Not Send Me PM For Support
    2 Do Not Send Me PM For ASK Test.
    3 Ask Your Question On The Forum.

    My Email is :