Announcement

Collapse
No announcement yet.

how to config oscam samargo card

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to config oscam samargo card

    1. If you are using Smargo cardreader on PC
    (Linux server),
    then use this config in oscam.server:


    Code:
    [reader]
    label                         = xx
    protocol                      = smartreader
    Device             = Serial:Reader xx
    caid                          = xx
    ident                         = xx
    smargopatch                 = 1 #you can leave this line
    rsakey                        = xx
    boxkey                        = xx
    detect                        = cd
    mhz                           = 357
    cardmhz                       = 357
    group                         = x
    emmcache                      = 1,3,2
    How to find out device info?


    Type these lines in telnet: lsusb -v | grep iSerial
    You should get something like this
    (this is an example!):


    iSerial 3 Reader 129


    Now you can add this in oscam.server:


    Code:
    Device = Serial:Reader 129
    Smargo cardreader will now work in OScam without any issues, even after rebooting your PC.
    Number 129 doesnt change.
    What you need is make sure your smartreader is updated to v. 1.4!
    I think that newer versions of firmware have problem with providing this useful

    information!

    2. If you are Smargo cardreader in Dreambox, VU+ or Xtrend/CT,
    please use this config in oscam.server:


    Code:
    [reader]
    label                         = xx
    protocol             = smargo #you can also try mouse instead of smargo
    device              = /dev/ttyUSB0 #if you have more smargos, just use /dev/ttyUSB1, /dev/ttyUSB2, etc.
    caid                          = xx
    ident                         = xx
    smargopatch                 = 1
    rsakey                        = xx
    boxkey                        = xx
    detect                        = cd
    mhz                           = 357
    cardmhz                       = 357
    group                         = x
    emmcache                      = 1,3,2
Working...
X