No announcement yet.

Search User Manual for Openbox S4 PRO+ HD

  • Filter
  • Time
  • Show
Clear All
new posts

  • Search User Manual for Openbox S4 PRO+ HD

    Hi all!
    Nice forum!
    I hope you can help me, i found this site trough google during my search for user manual for Openbox S4 PRO+ HD.
    I already ordered this very good receiver, but i didn't found the official manual of the device, so i hope you can help me.

  • #2
    great !! and enjoying watch !!

    Sumber :

    When you first look at the Openbox S4 HD PVR seems that this is a simple toy, but a list of its capabilities far crossed many advanced receivers with premium:

    Modern and powerful STi7110 decoder to MPEG4/MPEG2, HD / SD
    The possibility of simultaneous recording of up to three channels in HDTV quality
    Time-Shift mode, activated automatically
    Stable operation of all functions of PVR
    Advanced Mode "Picture in Picture" (PIP)
    The output video quality up to and including 1080p
    Support for drives USB 2.0 (one port)
    Analog outputs CVBS (RCA) and SCART (RGB)
    The presence of CI interface
    Playing movies in formats AVI, MKV
    View JPEG photos in high resolution up to 1080p
    Easy MP3 music player
    On YouTube
    Web-browser - to view the Internet sites on your TV
    Compatible with USB mice and keyboards
    Support for USB-WiFi module (dongle) to connect to wireless networks
    Ability to install additional plug-ins (Add-ons)
    Mode "blind search" Transponders
    Maximum ease of user menu
    Full and qualitative localization for the CIS market
    Openbox S4 Pro+ HD PVR 2.11.39 NEW!!!
    55 695 Кб


    What do you needs :

    1. 500s Satellite Receiver
    2. Modem Router
    3. RJ45 Cable
    4. Internet connection
    5. Outdoor Set Dish
    6.Server cccam

    1. Support 3G receievr Newest model for Europe Market
    2. HDMI+ USB/PVR +1CA1CI
    3. Linux Operating System
    4. 10/100Mbit Ethernet

    2.Linux Operating System
    3.10/100Mbit Ethernet

    1/Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
    2/Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
    3/Digital Video Recorder through USB (external flash or hard drive are not included)
    4/The most affordable FTA HD receiver on the market today.
    5/Worldwide compatible
    6/Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
    7/Linux MIPS Operating System
    8/HD DVB-S2 SHARP 7306 Tuner

    General Specifications:
    300 MHz MIPS Processor - Linux Operating System
    Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
    Fully compliant MPEG-2 MP@HL & MP@ML;
    Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3);
    SCPC & MCPC receivable from C/Ku band satellites;
    multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS) supported)
    NIT search supported;
    Support MHEG-5;
    Support HDMI 1.3;
    Support PVR(store in USB disk);
    Multimedia files playback(by USB);
    Support Electronic Program Guide(EPG) for 7 days;
    Teletext and subtitle out through OSD;
    Support multi-lingual DVB subtitle and teletext;
    Automatic and manual channel scan options;
    automatic service scan
    channel-change time < 1 second
    OSD in many languages and skin-support
    Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable;
    LED Display
    Multiple display mode: 1080i/720p/570p/576i/480p;
    MPEG-2 / H.264 Hardware decoding
    Videotext Decoder
    Analog audio output: stereo(L+R);
    Digital audio output: S/PDIF by coaxial and optical;
    S/PDIF Interface for digital bit stream out (AC-3)
    YCbCr available;
    Screen format:auto, 4:3, and 16:9;
    Upgrade software through USB2.0 port;
    Powerful program management function, parent lock;
    CA 1x slot and CI 1xslot
    10/100Mbit Ethernet Interface
    directly bouquet-lists
    DVB-S2 HD
    Input Frequency:950~2150MHz
    Loop Out Frequency:950~2150MHz
    Input Level:-65~-25dBm
    Input Impedance:75
    LNB Power: Auto/14v/18v/OFF, Imax = 500mA
    Video decoder
    Video Compression MPEG-2 and MPEG-1 compatible, H.246
    Video Formats 4:3 / 16:9
    Letterbox for 4:3 TV-Device
    Audio decoder
    Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Output digital
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical, Toslink
    Video parameter
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard
    Output: FBAS, RGB, S-Video
    Serielle Interface RS 232
    Typ RS232 bidirectional
    Bit rate 115,2 kBit/s max.
    Plug Connector SUB-D-9
    Function: Update of Firmware
    10/100 MBit compatible interface
    Function: Update of Firmware

    1 x USB 2.0 Host ,PVR
    LNB power and polarisation per tuner
    LNB Current 500mA max.; short-circuit-protected
    LNB Voltage vertical < 14V no load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
    Count of active satellite position
    DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
    DiSEqC - Rotor Control
    External PSU
    Input:110-240V AC / 50-60Hz / 0,6A
    Output: 12V = / 3,0A
    Physical specification
    Ambient Temperature +15 C...+35 C
    Humidity < 80%
    Size (W x D x H): 300 mm x 220 mm x 56 mm
    Weight: 1,8 kg without HDD
    Power AC input range:100-240VAC 50/60Hz
    PowerConsumption (Standby): Max. 10W (<1 W)


    Supported Modems:
    K3765 VODAFONE
    K3770 VODAFONE
    E153 HUAWEI
    E161 HUAWEI
    E173 HUAWEI
    MF100 ZTE
    MF180 ZTE
    MF190 ZTE
    MF658 ZTE
    DWM-156 DLINK
    CBU 450D TP LINK
    K3565 VODAFONE
    MF626 ZTE
    E156G HUAWEI
    MR 3220 TP LINK
    K3565 VODAFONE
    MF626 ZTE
    E156G HUAWEI
    E160G HUAWEI
    E1676 HUAWEI
    E177 HUAWEI

    buat masbro Hans, sempet liat foto nya tadi, sekalian aja saya ketikin...
    BISS Keys:

    o Not Send Me PM For Support
    2 Do Not Send Me PM For ASK Test.
    3 Ask Your Question On The Forum.

    My Email is :


    • #3
      It was a lot of info, but i repeat my question where i can get the official manual of the device?
      I know i will get my manual in package, but what i miss is digital version of the manual.


      • #4

        click Menu -> System Setup

        When you see the System Setup screen displayed, Press 2 7 7 8 on your remote control

        and then the Access Control Option will become available

        Click on Access Control

        If you Press 2 7 7 8 on your remote control once again, the Access Control will be hidden from sight

        now click on CCcam Client Setup

        Now click Update Files By Usb

        Now select Option 1 CCcam.cfg and click the Red button to load the clines.

        Remember to set Load Balance to OFF when running multiple clines.

        Once you see CCcam.cfg Load Data OK click the Exit button

        Now the clines have been uploaded, we need to activate them.

        Click CCcam.cfg Edit

        Now you must enter the Password, the default Password is 0 0 0 0

        Click CCcam Edit

        As you can see all clines are Off-Line and inactive

        Highlight / Select each line one by one and click the OK button
        this will indicate which line you wish to use, and place a check mark / tick next to the line.

        Once you have placed a Tick next to all your lines click the Exit button

        You can if you wish chech the status of your lines by going back into the previous Menu you just left.
        And once a connection has been established, your clines will then become active

        you can now exit all Menus.

        o Not Send Me PM For Support
        2 Do Not Send Me PM For ASK Test.
        3 Ask Your Question On The Forum.

        My Email is :