Announcement

Collapse
No announcement yet.

MGcamd-CCcam support for Spark / Amiko Alien 2 using cccam.list file

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MGcamd-CCcam support for Spark / Amiko Alien 2 using cccam.list file

    MGcamd-CCcam support for Spark / Amiko Alien 2 using cccam.list file

    MGcamd-CCcam client support for Spark / Amiko Alien 2 by FTP / cccamd.list file


    This how to guide explains how to setup a CCcam client connection using FTP and a cccamd.list file using the available plugins for Spark / Amiko Alien 2.


    Items required:

    USB Stick Formatted to FAT32 – Use HP Format Tool for formatting if you have any
    problems with the USB not being seen by the Amiko Alien 2 after formatting using
    Windows.


    The latest Amiko Alien 2 Plugin Pack file – This will be something that will constantly be
    updated from time to time but the latest version will always be available to download from
    amiko plugins section

    FTP Software This guide will assume that you already know and are comfortable with using
    FTP software. Popular choices for Windows include software such as FileZilla, DCC and
    WinSCP.

    Amiko Alien 2 Digital Receiver –

    This guide is created for the Amiko Alien 2 Digital receiver (available with various tuner configurations).

    1) Download latest Amiko Alien 2 Plugin Pack file from the plugins section ( Amiko ) and
    save this file to your computer.

    2) Insert a USB stick into your computer, open the Plugin Pack file you just downloaded and
    extract the complete plugin directory from the .zip or .rar file to the root of the USB stick
    (which must have been pre-formatted to FAT 32).

    3) Now remove the USB stick from your computer and with your Amiko Alien 2 receiver
    powered on and connected to your TV insert the USB stick into a USB port on Amiko Alien 2
    receiver (either front or rear USB port will work).

    4) Within a few seconds the Amiko Alien 2 receiver will read the USB stick and then
    automatically prompt you on screen saying ‘Confirm Do you want to upgrade plug in?’ –
    Select YES using the remote control arrow keys and then press OK on the remote control.
    This will now display the ‘Upgrade from USB’ menu and the update will start automatically
    which will only take a few seconds and once complete will automatically reboot your
    receiver. At the point of reboot you can now remove the USB stick from the Amiko Alien 2
    (if you don’t then the receiver will keep prompting to update after each reboot).

    5) When your Amiko Alien 2 receiver has finished booting back up you should now be back
    to the usual Spark firmware but there will now be a whole host of extra plugins that have
    been installed which can all be found by selecting MENU > Plug in using the remote control.

    6) We’ll now head over the the FTP side of things, so with your FTP software running
    connect to your Amiko Alien 2 receiver (standard FTP username and password for Spark is
    root and root) and head to the /root/plugin/var/keys directory. This is where your
    cccamd.list file will need to be placed. There may already be a cccamd.list file in this
    directory depending on our previous setups, if so you can simply edit the existing
    cccamd.list file to add your required information or if no cccamd.list file exists then you can
    edit the blank cccamd.list file included with this guide with your details and transfer this
    over – it makes no difference either way how you do this providing the cccamd.list file
    contains your correct C line details and that it is housed in the /root/plugin/var/keys
    directory.

    7) Once you are happy that the cccamd.list file has been edited and saved correctly and
    saved to the correct directory you are now finished with the FTP side of things, you can
    disconnect and move on to the next step.

    8) We are now going to the Amiko Alien 2 on-screen menu and the plugins previously
    installed. With this guide we are interested in setting up a client connection to CCcam so to
    continue to the next step in Spark you should go to MENU > Plug in > mgcamd.sh4 and
    while this is highlighted press the OK button (you should see the red square on the right
    hand side turn to a green triangle along with on-screen prompts telling you this plugin has
    started).

    At this point you are now finished, providing all your details were entered correctly and
    saved you will now be connected as a client to your specified server. Exit all the menus,
    leave is a few seconds and then check it out to confirm it’s working.

    SOMETIMES BECAUSE OF CHANGES MADE AT THIS POINT IT’S A GOOD IDEA TO REBOOT
    THE AMIKO ALIEN 2 TO ENSURE ALL THE CHANGES ARE TAKEN INTO ACCOUNT.

    This guide is intended to cover the very basic and very easy client setup using the stand-
    alone MGcamd Plugin. If you were familiar with Mgcamd/CCcam on a Linux receiver before
    now then this way probably doesn’t get much easier but for those of you that are not
    familiar with FTP and the likes then use the forum check out the FTP guides in the tutorials section and of course if after giving this a try you struggle with using FTP software just post the question in the forum detailing where you are at and asking for help and members will be able to try and point you in the right direction.


    Example of basic CCcam client connection details:

    CCcam
    Code:
    C: example.server.com 12000 username password


    Code:
    #Blank cccamd.list file for use with the Amiko Alien 2 
    #Use the following format: 
    #C: server_address port username password 
    # 
    # REMEMBER TO MOVE THE # SYMBOL FROM THE FRONT OF A LINE IF YOU WANT IT TO BE USED 
    #
    save the above as cccamd.list
Working...
X