Announcement

Collapse
No announcement yet.

Upgrade Spark by USB

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgrade Spark by USB

    Upgrade Spark by USB
    Preparation:
    1. We only recommend Kingston USB stick, we donít support USB hard disk
    2. Please make sure your USB stick only have 1 partition and the file system is
    FAT32
    3. Set default booting system to [spark].

    Upgrade Step:

    1. Make sure [C:/spark] is exist, if not, please create this folder.
    2. copy [mImage] and [userfsub.img] to [C:/spark]
    3. Connect USB stick to STB
    4. Keep Pressing [OK] Button in Front Panel, then power on STB.
    5. After 5 seconds, you will see [Forc] in LED, release [OK] button and press
    [Right] Button.
    6. if everything OK, You will see [U LD] shining in LED
    7. if upgrade success, You will see [SUCC] and STB reboot automatically
    8. If upgrade not finishes in 5 minutes, then there must be something wrong, please
    check your configuration and re-try.
Working...
X