Announcement

Collapse
No announcement yet.

Amiko HD Mini FW update. Remote control does not work.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [HELP] Amiko HD Mini FW update. Remote control does not work.

    Salve a tutti. come da titolo dopo che ho aggiornato il mio Box con un Abs : FW : AMIKO_MiniHD_synaps_gi_1.6.26_cyan_V.271_by-Satsonne.
    si accende ma non riesco più a interagire con il mio Telecomando. Come se fosse morto il segnale tra i due.. ora ho attaccato il BOX al mio Pc con un cavo RS232.




    Hello to all. as the title after I upgraded my box with an Abs: FW: AMIKO_MiniHD_synaps_gi_1.6.26_cyan_V.271_by-Satsonne.
    turns on but I can not interact with my remote control. As if he had died the signal between the two .. now I attached to my PC BOX with an RS232 cable:
    .


    Dopo di questo ho fatt numerosi Test con il cavo ma non sono riuscito ancora a caricare un altro FW ABS..


    After that I fatt numerous tests with the cable but have not yet managed to load another FW ABS ..


    .


    .


    .


    .


    Spero potete aiutarmi.. Grazie


    I hope you can help me .. Thanks

  • #2
    change SETTING to 1 LNB From Amiko reciver
    ------------------------------------------

    1
    D
    o Not Send Me PM For Support
    .
    2 Do Not Send Me PM For ASK Test.
    3 Ask Your Question On The Forum.

    ------------------------------------------
    My Email is :
    mspauljayo[at]gmail.com
    ------------------------------------------


    Comment


    • #3
      come faccio? il telecomando non comunica con il ricevitore.


      how can I? the remote is not communicating with the receiver.

      Comment


      • #4
        you need cable RS232



        i think you need Amiko Mini HD remote bin file

        Comment


        • #5
          is this Amiko Mini HD SE or Amiko Mini HD T2/C ????????????

          PM : press 0000 or 1111 on remote control
          Last edited by AzBox; 26-07-2014, 05:19 PM.

          Comment


          • #6
            have you changed Remote control ? you can ask it from your frinds and test it

            Comment


            • #7
              sto usando già un RS232 USB.. su COM3. ma mi da sempre un errore quando carico il FW. Il telecomando ha sempre funzionato, solo dopo l'ultimo agg. non comunica più con il decoder.


              I'm already using an RS232 .. USB on COM3. but it always gives me an error when I load the FW. The remote control has always worked, only after the last update. no longer communicates with the decoder.

              Comment


              • #8
                I have a "Amiko Mini HD"

                Comment


                • #9
                  Use this File :AMIKO_MiniHD_1.6.38.remote.zipAMIKO_MiniHD_1.6.38.remote.zip

                  But it's not Actvie You can Setup your Device to LNB Type Standard
                  Use your Device Buttons
                  press [Volume Up/ Volume Down] key can switch among “Standard” , “User” and “Universal” , ”Unicable”mode //


                  Good Luck
                  Last edited by Guide; 26-07-2014, 06:59 PM.

                  Comment


                  • #10
                    Grazie ora provo.. Può scriverlo meglio? come farlo. non ho capito bene. GRAZIE

                    Thanks GUIDA now I see. Can write it better? how to do it. I'm confused. Thank you

                    Comment


                    • #11
                      I advise you,
                      use device Buttons and Amended on the settings

                      searching ......
                      "LNB Type" >>make it >> "Standard"
                      Last edited by Guide; 26-07-2014, 07:11 PM.

                      Comment


                      • #12
                        Questo è il mio Dispositivo. non ha pulsanti avanti e dietro.


                        This is my device. it has no buttons back and forth.

                        Comment

                        Working...
                        X