Announcement

Collapse
No announcement yet.

Guide for the newbies

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guide for the newbies

    Guide for the newbies.

    Heres how to load the patches.

    • Download the relevant patch and extract.
    • Download the relevant loader and extract.
    • Connect your receiver to the pc via rs232c cable.
    • Choose the correct com port.
    • Leave the receiver on standby.
    • Open the loader and select the software tab.
    • Press browse and find the extracted patch.
    • Press ok then start then wait.


    This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

    USB, By Benny/9

    FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
    there are various models and only the correct patch will work or even load on your model
    ************************
    • Download the correct patch for your receiver.
    • Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
    • Insert your usb memory stick in the usb port under the front flap.
    • Turn the receiver on ready to load the patch then press the usb button on your remote.
    • on the next screen go to data transfer and click>OK.


    now you will see a panel with the patch on it, it will highlight, [for patching].
    press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
    ***************************
    you also load softcams/channel lists/official software etc:in exactly the same way by selecting
    the item you want to load.
    ****************************


    Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

    Hope this is found helpful. Sadiq999uk and Benny/9

  • #2
    Thanks for taking the time to help learners.

    Comment

    Working...
    X